Close Victron Energy 12.8V 100Ah LiFePO4 NG Battery The battery is used in devices with a power and power supply capacity of 1% per 100 cycles at the power supply (100% DoD). High power and power supply (92%) ensure safe use of electrical energy. Impressive cyclic performance (up to 5,000 cycles at 50% DoD) ensures the device is tested for long-term use. The battery supports management via an external BMS system, the Lynx Smart BMS NG. The housing is IP65-rated against dust and water, making the device resistant to harsh environments. The battery's wide operating temperature range (-20°C to +50°C when connected) and low self-discharge (≤ 3% monthly) make it suitable for use in laboratory environments. The product meets safety standards such as UL1973, UL9540A, and IEC62619, as well as automotive and electromagnetic compatibility (EMC) standards. Software update and service capability.

Specifications:

• Nominal voltage:12.8 V
• Nominal efficiency (at 25°C):100
• Nominal energy (at 25°C):1280 Wh
• Maximum capacity: < 1% per 100
• Energy loss: < 1% per 100 cycles
• Charge/discharge cycle efficiency:92%

Cycle life

• 80% Up to:2500 cycles
• 70% Up to:300
• 50% Up to:500

Parameters

• Maximum continuous electric current:100 A (1C)
• Maximum pulse current (10s):200 A (
• End-of-cycle voltage:11.2 V
• Internal resistance:2 million

Charging parameters:

• Charging voltage:14 V – 14 V
• Floating voltage:13.5 V
• Maximum charging current:100 A (1C)
• Maximum pulse charging current (10s):200 A (2C)

Battery management system (BMS):

• BMS: Lynx Smart BMS NG 500 A / 1000 A (M10 rails) - sold separately
• Measurement:temperature and cell temperature, electric current
• Interface:M8 cable (male and female), 50 cm long (extendable)
• Function Alarm: Pre-alarm contact in BMS Bluetooth: Connected to BMS Maximum number of batteries in one BMS: 50 (384 kWh in one BMS) Software updates: Automatic via BMS Repairability: Yes (cover can be attached with a screw) ul> Operating conditions: Operating temperature: ul> Discharge: -20°C to +50°C
• Charging: +5°C to +50°C

Storage Temperature:-45°C to +70°C

Humidity: Max. 95% (non-condensing)

Protection Class: IP65

Mounting:

• Options:strap or mounting brackets
• Can be mounted on Sides: Yes ul>

  Other Information: ul>

  Self-Discharge Rate: ≤ 3% per month (at 25°C)

  Power Connector: M8 (threaded inserts and screws)

  Dimensions: 235 x 197 x 160 mm

  Weight: 9 kg ul>

  Certifications and Standards:

  • Cell Safety:UL1973, UL9540A, IEC62619
  • Battery:IEC 62619 (during run)
  • EMC:EN 61000-6-3, EN 61000-6-2
  • Automotive:ECE R10-6 (during run)
  • Efficiency:IEC 62620 (during run)

  Victron Energy 12.8V 100Ah LiFePO4 battery NG is an advanced battery management system (BMS) with a monitoring application, enhanced software, and load protection, enhanced security, and access control. Its robust design, IP65 waterproof housing, and compliance with specific safety standards make this battery an ideal solution for electrical devices connected to a variety of environmental conditions.