Close The Victron Energy LiFePO4 Battery 25.6V/100Ah NG is an innovative lithium-iron-phosphate battery with IP65 protection that provides reliable energy storage at a nominal voltage of 25.6V. It enables flexible 12V, 24V, and 48V system configurations by connecting batteries in series, parallel, or series-parallel. Up to 50 batteries can be connected to create a system with a maximum capacity of 192 kWh at 12V and 384 kWh at 24V and 48V. The BMS provides fully automated monitoring of battery parameters, such as cell condition, voltage, current, and temperature, thanks to the VictronConnect and GX apps, and the VRM Portal platform. The system generates alarms and protects the batteries by disconnecting the load at low voltage and stopping charging in the event of overheating.

Connectivity and Remote Monitoring

Built-in Bluetooth enables convenient remote battery monitoring via smartphone or tablet. The VictronConnect app allows you to view charge levels and usage history, increasing convenience and control over your device's operation. Thanks to LiFePO4 technology, the battery is lighter and easier to install than its lead-acid counterparts. It can be mounted using brackets, making it an ideal solution for recreational vehicles, boats, or stationary solar installations.

Safe and Ecological Technology

LiFePO4 technology is characterized by a high level of safety and a low risk of overheating or explosion. These batteries are also more environmentally friendly to produce and recycle, reducing their environmental impact.

Specifications

1. Parameters / Model Victron Energy 100Ah LiFePO4 NG
2. Nominal Voltage25.6 V
3. Nominal Capacity100 Ah (at 25°C)
4. Nominal Energy2560 Wh (at 25°C)
5. Capacity LossPer 100 Cycles at 25°C, 100% Depth of Discharge: < 1%
6. Energy LossPer 100 Cycles at 25°C, 100% Depth of Discharge: < 1%
7. Charge and discharge cycle efficiency92%
8. Cycle life (efficiency ≥ 80% nominal)
   • 80% DoD: 2500 cycles
   • 70% DoD: 3000 cycles
   • 50% DoD: 5000 cycles

Discharge

1. Maximum continuous discharge current (C rating)100 A (1C)
2. Maximum pulse discharge current 10s (C rating)200 A (2C)
3. End-of-discharge voltage 22.4 V
4. Internal resistance 4 mΩ

Charging

1. Charging voltage Between 14 V / 28 V / 56 V and 14.4 V / 28.8 V / 56.8 V
2. Float voltage 13.5 V / 27 V / 54 V
3. Maximum charging current (C rating) 100 A (1C)
4. Maximum pulse charging current 10s (C rating) 200 A (2C)

General

1. BMS-es Lynx Smart BMS NG 500 A / 1000 A (M10 rails) - sold separately. Cell Measurements: Cell voltages and temperatures, battery current. BMS Battery Interface: Male and female cable with M8 round connector, 50 cm long. M8 extension cables available (1-5 m)
2. Alarm functionPre-alarm contact on BMS
3. Bluetoothin BMS
4. Maximum number of batteries per BMS50 (384 kWh per BMS)
5. Battery firmware updatesAutomatic updates via BMS
6. RepairabilityYes (cover can be removed with screws)

Operating conditions

1. Operating temperature
   • Discharging: -20°C to +50°C
   • Charging: +5°C to +50°C
2. Storage temperature -45°C to +70°C
3. Humidity (non-condensing) Max. 95%
4. Protection ClassIP65

Mounting

1. Mounting OptionsStrap or Mounting Brackets
2. Side-MountableYES

Other

1. Self-Discharge Rate≤ 3% per month at 25°C
2. Power ConnectorM8 (Threaded Inserts and Screws)
3. Dimensions (H x W x D)235 x 341 x 160 mm
4. Weight19 kg

Standards

1. Safety
   • Cells: UL1973, UL9540A, IEC62619
   • Battery: IEC 62619 (certification pending)
2. EMCEN 61000-6-3, EN 61000-6-2
3. AutomotiveECE R10-6 (certification pending)
4. EfficiencyIEC 62620 (certification pending)

Victron Energy LiFePO4 Battery 25.6V/100Ah NG is a modern battery Lithium iron phosphate battery offers reliable energy storage in a compact, lightweight design. Equipped with an intelligent BMS management system and a built-in Bluetooth module, it allows for easy monitoring and control of operating parameters via mobile apps. With a high IP65 rating, it is dust and water resistant, making it ideal for demanding environments. Its low self-discharge rate and flexible configuration options make it ideal for both mobile and stationary systems.